|
Metal Ace Cast Frame English Wheel
…is shaped to facilitate clearance for panels both upward and downward contours Screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90-degree rotation…
|
|
|
MetalAce 28F Cast Frame English Wheel
…is shaped to facilitate clearance for panels both upward and downward contours Screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90-degree rotation…
Prices From: $98.00
|
|
|
MetalAce 44F English Wheel
…rolled into the center of an 88" panel Also features storage for the anvil wheels Screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90-degree rotation…
Prices From: $2595
|
|
|
JD2 Model 32 Tube and Pipe Bender
…position. When bending resumes the ramp machined into the lock pin will automatically lift the pin out of the drive hole. This mechanism combined with the included anti-springback…
|
|
|
Boyd Built Sheet Metal Brakes
…construction * 1" OD radius bar (optional on some models) Standard Specs * 1-7/8" Max beam lift * 2" Beam adjustment, front to rear * 1/2" Minimum reverse bend * 5/8" Minimum flange @…
|
|
|
Boyd Built Sheet Metal Brakes
…* Heavy steel plate construction * 1" OD radius bar Standard Specs: * 1-7/8" Max beam lift * 2" Beam adjustment, front to rear * 1/2" Minimum reverse bend * 5/8" Minimum flange @…
Prices From: $1850
|
|
|
Model 32 Manual or Hydraulic Tubing Bender
…position. When bending resumes the ramp machined into the lock pin will automatically lift the pin out of the drive hole. This mechanism combined with the included anti-springback…
Prices From: $395.00
|
|
|
|
JD2 Model 32 Tube and Pipe Bender
…position. When bending resumes the ramp machined into the lock pin will automatically lift the pin out of the drive hole. This mechanism combined with the included anti-springback…
|
|
|
Jet Hand Brakes
…HB-1648 Stock # 752122 752116 756222 756216 Maximum depth of box 3" 4" n/a n/a Maximum lift of beam 7/8" 1-1/4" 7/8 1-1/4 Beam Adjustment 1/8" 5/8" 1/8" 5/8" Number/Width of Fingers…
Prices From: $279.00
|
|
|
Tennsmith Slip Rolls
…roll adjusting screws, scales for speeding repeat set-up, and a front-mounted handle to lift the upper roll for material removal. Wire grooves are standard. Three Driven Rolls Models…
Prices From: $275.00
|
|
|
Jet Box and Pan Brakes
…product! Model BP-1696H BP-1248N Stock # 752102 754100 Maximum depth of box 4" 4" Maximum lift of beam 2-1/4" 1-1/2" Beam Adjustment 1" 7/8" Number/Width of Fingers 5 @ 3", 6 @ 4", 9…
Prices From: $4099.00
|
|
|
Mittler Brothers Ultimate Box and Brake
…Angle Apron (leaf) fingers Bending Length 48" / 72" Maximum depth of box 3-1/2" Maximum lift of beam 1-1/4" Front to rear adjustment 7/8" Minimum reverse bend 1/2" Minimum flange capacity…
Prices From: $275.00
|
|
