 |
JMR Dimple Dies
…dimple dies from JMR are used to improve the strength and appearance of a panel and will flange or flare an existing hole in sheet metal up to .125" 4130 Chrome Moly. They work great…
Prices From: $45.00
|
|
 |
Pexto Rotary Machine
…of uses: beading, crimping, double seaming, turning, burring, wiring, elbow edging, flanging, and flattening. The No. 622 Series is equipped with the addition of a 7" deep throat…
Prices From: $78.00
|
|
 |
Tennsmith Hand Notcher
…two set screws to permit limited throat piercing and knockout operations. Optional box flange blades are available for reinforced box, pan and chassis corners. Front gauges and large…
Prices From: $265.00
|
|
 |
C Cook Pullmax Tooling & Shrinking Dies
…Pullmax machine for a variety of metal working applications such as shrinking, beading, flanging, edge-setting, and more. C Cook tooling is well known among metal workers. Their top-notch…
Prices From: $275.00
|
|
 |
M4B Directions
…diameter drive link sleeves 1 Hydraulic swivel block - 1 Pusher block with 1" diameter flange bolt welded in place 1 Pusher block handle 1 3/16" roll pin 1 1 1/2" diameter pushrod…
|
|
|
|
[Bead_Roller_Manual.pdf]
….PART NO. 1 1 200-060 Frame 2 1 200-022L Lower Shaft 3 2 200-024 Drive Gear 4 4 200-501 Flanged Bronze Bushing 5 1 200-022U Upper Shaft 6 1 200-016 Adjustable Bearing Block 7 1 200-017…
|
|
|
|
|
|
 |
Boyd-Built Sheet Metal Brakes
…(front to rear) 2" 2" 2" 2" 2" Minimum Reverse Bend 1/2" 1/2" 1/2" 1/2" 1/2" Minimum Flange @ Capacity 5/8" 5/8" 5/8" 5/8" 5/8" Weight 565 lbs. 750 lbs. 895 lbs. 1275 lbs. 1790 lbs…
Prices From: $1295
|
|
 |
JET Rotary Machine
…Features * Long throat makes unit highly versatile * Performs burring, edging, elbowing, flanging, flattening and turning * Adjustable roll pressure by means of top mounted hand crank…
Prices From: $499
|
|
 |
Roper Whitney 5 jr and XX Hand Punch
…a deep throat configuration to punch up to 3 1/4" from the edge with up to an 1-3/8" flange. * Refer to the tonnage chart to determine if the rated capacity of this tool will accomodate…
Prices From: $28.00
|
|
 |
MetalAce English Wheel
…tighter angle accessibility. The narrow offset is used in tracking completely up to a flange. Be the first to review these products! Van Sant Enterprises, Inc. Hours: 7:30 - 5:30 CST…
Prices From: $92.00
|
|
 |
ProLine Tapered T Dolly Set
ProLine Tapered T-Dolly These high quality Tapered dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded dolly. Commonly used for building…
Prices From: $45.00
|
|
