|
StrongHand MagSpring Clamp
…shape; round, flat or square, and the 500 lbs of clamping pressure will hold nearly any workpiece in place. Finally, these clamps feature durable heat treated steel construction and…
|
|
|
Strong Hand Shark Clamp
…can produce clamping pressures of up to 1,000 lbs. With jaw openings of 5 and 6.5 inches, these clamps can tackle nearly any job in the shop. Stock Items Small Shark Clamp (5" opening…
|
|
|
Strong Hand Welders Clamp
Strong Hand Welders Clamp These heavy cast iron clamps provide a firm hold, perfect for welding steel joints. Can be bench mounted or used freely around the shop. * Heavy cast iron…
|
|
|
beastsinstructions
…Tube Clamp to be easily positioned to securely clamp the tube down. However, if necessary, you can use more than one clamp. We sell BEAST clamps separately or you can use a C-clamp if…
|
|
|
|
101200sManual
…Clamp Slider T-Handle 1/2"-20 Set Screw Flat Head Bolts 1/2" Bolt Stop Bolts (Qty. 2) Slider 1/2"-20 Jam Nut 1/2"-20 Jam Nut 1/2" Machine Bushing 1/2" Machine Bushing Tube Clamp Page…
|
|
|
|
BuildProsLit LQ
…Clamps UDN5150 & UDWN5150 0.2 lbs. XFA2 For Inserta-Clamps UEN5200, UERN5200 & UWN5200 0.4 lbs. For 360º Clamps T51405 & T51510 XMA2 For 360º Clamp T51615 0.6 lbs. Throat Clamping…
|
|
|
|
New-100-Hyd-Tube-Notchers-Owners-Manual
…Die (#7). 4. Tighten SHCS. Tube Hold Down Clamp Assembly: 1. Install ¼-20 x 1-1/2" Socket Head Cap Screws (#14) (qty. 2) through Clamp Hoop (#8). 2. Thread SHCS (#14) into Female…
|
|
|
Ice Engine Works Tack-Weld Clamps
…product! Qty. 1-5/8" OD Clamp (p/n 1625TTWC1). $34.99 1-5/8" OD Clamps, Set of 4 (p/n 1625TTWCS). $99.99 1-3/4" OD Clamp (p/n 1750TTWC1). $34.99 1-3/4" OD Clamps, Set of 4 (p/n 1750TTWCS…
Prices From: $34.99
|
|
|
|
20101K
…includes 1.6xD clamps (serrated) on 2", 2.25", 2.5" and 3" tooling which will result in marking of material in the clamping area. All other tools are made with 2.5XD clamp lengths (straight…
|
|
|
|
2060EX
…tools are made with 1.6xD clamp lengths (serrated) which will result in marking of the material in clamping area. All other tools made with 2.5xD clamp lengths (straight) unless specified…
|
|
|
|
|
|
JD2 Beast Tube Notcher
…tubing clamps * Can offset notch up by moving cutter vertically * 1" Ground & Polished Stainless Steel shaft * Double sealed needle bearings * Easy mounting: Bolt or clamp it to a…
Prices From: $499
|
|
